T-Case & E-Locker Position Switch - Aftermarket - Fits (ELEC12010AFT)

OEM T-Case & E-Locker Position Switch Includes: 1 x T-Case & E-Locker Position Switch If you are unsure on the proper fitment for your vehicle, please email info@cruiserteq.com...

Air Pump Belt - Japanese - Fits 3FE (BELT02193AFT)

Japanese Air Pump Belt Includes: 1 x Japanese Air Pump Belt If you are unsure on the proper fitment for your vehicle, please email info@cruiserteq.com with the full Model Code and Frame# /...

Front Motor Mount - Fits 8/1987 - 1/1990 FJ62 (EGM61030F)

Front Motor Mount 2 required per Vehicle Includes: 1 x Motor Mount If you are unsure on the proper fitment for your vehicle, please email info@cruiserteq.com with the full Model Code and...

Front Wheel Bearing Kit - Fits 1998-2007 Solid Axle Non-US 7x Series - Timken

Cruiser Teq Front Axle Wheel Bearing Kit Kit Includes: 1 x Timken Inner Bearing and Race (Large) 1 x Timken Outer Bearing and Race (Small) 1 x HG62001 - Disc Wheel Seal (Early) 1 x RA62007...

Transfer Case Rebuild Kit - Fits 8/1992-1/98 FZJ80/LX450 with original HF2AV Transfer Case

High Quality Japanese T-Case Rebuild Kits. Includes: 1 x Plug O-Ring 1 x Shift Shaft Lever Seal 1 x Transmission to T-Case Seal 1 x Front Output Flange Seal 1 x Rear Output Flange Seal 1...

Full-Float Rear Axle Koyo Bearing/Seal Kit - Fits 8/92'-1/98' 7x/8x Full-Float Axles

One required per axle. Kit Includes: 4 x Koyo Bearings 2 x RA35001 - Inner Axle Seals 2 x RA60040 - Axle Flange Gaskets 2 x RA62002 - Wheel Seals 1 x DG36010 - Differential Gasket (W/O...

Clutch Kit - Fits 8/87-1/90 BJ6x/7x w/13BT

All Chassis Teq Heavy Duty Japanese Clutch Kits include AISIN pressure plate, AISIN clutch disc, Koyo or OEM Toyota throw out bearing, Koyo or OEM Toyota pilot bearing and clutch alignment tool...

DISCONTINUED - Fuel Pump - Fits 8/1987 - 8/1992 FJ6x/FJ8x w/3FE Applications (EGF43070)(USE EGF43070KIT)

DISCONTINUED - Purchase EGF43070KIT Kyosan Japanese Fuel Pump For Toyota Land Cruiser Applications Includes: 1 x Fuel Pump If you are unsure on the proper fitment for your vehicle,...

Front Axle AISIN Hub/Drive Flange Stud Hardware Set - Fits 1958 - 1/1998 4x/5x/6x/7x/8x Front Axle Applications - Pack of 1 (HUB6997KA)

Aftermarket AISIN Hub/Drive Flange Stud Set For Toyota Land Cruiser Applications Includes: 1 x Stud 1 x Cone Washer 1 x Lock Washer 1 x Nut Tightening Torque Spec: 11-16 ft-lbs / 1.5-2...

Front Axle Drive Flange Dust Cap - Fits 9/1975-2007 4x/5x/6x/7x/8x/10x w/ Drive Flange NOT Aisin Hub Applications (HUB35010)

Aftermarket Drive Flange Dust Cap For Toyota Land Cruiser Applications Includes: 1 x Drive Flange Dust Cap If you are unsure on the proper fitment for your vehicle, please email...

Front Wheel Bearing Kit - Fits 1998-2007 IFS UZJ100/LX470 - Koyo (FAWB9807K)

CruiserTeq Front Axle Wheel Bearing Kit Kit Includes: 1 x Koyo Outer Bearing and Race (Small) 1 x Koyo Inner Bearing and Race (Large) 1 x HUB70011 - Disc Wheel Seal 1 x HUB60070 - Drive...

Transfer Case Rebuild Kit - 1/1998-2007 UZJ100/LX470 with full-time 4WD Transfer Case

High Quality Japanese T-Case Rebuild Kits. Includes: 1 x Plug O-Ring 1 x Shift Shaft Lever Seal 1 x Transmission to T-Case Seal 1 x Front Output Flange Seal 1 x Rear Output Flange Seal 1...