OEM Toyota Split Split T-Case Assembly For Toyota Land Cruiser Applications
Includes:
- 1 x T-Case Assembly
- 1:1 High Range Ratio - - 2:1 Low Range Ratio
If you are unsure on the proper fitment for your vehicle, please email info@cruiserteq.com with the full Model Code and Frame# / Vin#
Fits 8/80+ 4x/6x/7x Applications
If you are unsure on the proper fitment for your vehicle, please email info@cruiserteq.com with the full Model Code and Frame# / Vin#
OEM Split T-Case Assembly. New OEM Toyota. Fits 8/80 & Newer 4x/5x/6x/7x Series and earlier Land Cruiser applications with a 19 spline output shaft H41/H42/H55F/Auto transmission. Features a 38mm Idler Shaft (Replaces 34mm idler shaft models without any additional parts). Manual Shift Case. This case does NOT have bolt hole drilled below input shaft. This hole must be drilled when bolting to 8/80-1985 H42 short transmissions. This bolt hole is not used with late H42, H55F or automatic transmissions. This case features a standard length 2WD-4WD shift shaft for use with stock linkage or our part# TCSCSHFTKIT linkage kit.
Does not include the following:
- External shift linkage components (Re-Use 1985+ original or 1 x order part# AA715569 or TCSCSHFTKIT)
- Transmission to Transfer Case Gasket (Order part# 1 x TCGSK33142)
- Input gear (re-use original or order part# 1 x TCG3621260081 or TCG60080L)
- Input spacer (re-use original or call to order part# 1 x TCG36251L)
- Input bearing (re-use original or call to order part# 1 x TCB35013)
- Input shaft nut (Order part# 1 x TCN26004)
- Speedometer Driven Housing, Gear & HW (Call to order)
- Transfer Case to Transmission Hardware (Call to order)
- Front and Rear Output Flanges (Order part# TCF60010SC, TCF60020SC, TCF60041SC and/or TCF60070SC, 2 required)
- Front/Rear Output Flange Washer (Re-Use 1980+ original or order 2 x part# TCW22005)
- Front/Rear Output Flange Nut (Re-Use 1980+ original or order 2 x part# TCN22005)
Please call for additional information and components.
THESE BRAND NEW UNITS SHIP WITHOUT OIL. OIL NEEDS TO BE ADDED BEFORE USE!
