Ring and Pinion Install Kit (Differential Overhaul Kit)
Kits include everything needed for a standard differential overhaul or ring and pinion installation
Kit Includes:
- 2 x Pinion Bearings
- 2 x Carrier Bearings
- 1 x Pinion Nut
- 1 x Pinion Seal
- 1 x Crush Sleeve
- 1 x Pinion Depth and Preload Shim Kit
- 1 x Marking Compound
- 1 x Silicone
*8" Kits also include the ring gear bolts which are not required for the 9.5" applications
If you are unsure on the proper fitment for your vehicle, please email info@cruiserteq.com with the full Model Code and Frame# / Vin#.
Fits URJ200 9.5" Rear Differential & 1998-2007 UZJ100/LX470 Rear Differential when installing TOYLC488R200
Please see our Toyota Axle Re-Gear or Rebuild Information Article here
Always replace worn or failed bearings and leaking axle seals with high quality parts to ensure long and trouble-free performance. When replacing or upgrading axle shafts, bearing & seal replacement is always recommended.
