100 Series IFS Old Man Emu Suspension Kits For Toyota Land Cruisers
Old Man Emu suspensions achieve excellence with their range of fully integrated 4x4 shocks & suspension systems.
Vehicle suspension, especially those that are fitted to 4WDs, are complex to say the
least. So many factors go towards determining the right solution that no one "fix" is the answer to all vehicle models. Old Man Emu is unique. The philosophies, technology & methods behind the development of each of our products combine to ensure you get the best components the world has to offer.
From humble beginnings in the tough world of off road racing in Australia, to now being respected world wide, OME takes a unique approach to the design, development, testing and support of their product range.
Many of their customers love toughing it off road, and this can vary from endless hours, even days, of flat, yet corrugated dirt roads to hardcore, deeply rutted, rock strewn off road tracks. At the other end of the spectrum there are the four wheel drive owners who have no intention of tackling anything remotely off road. Instead, they’re looking for dramatically increased ride comfort on the bitumen or to give them access to their weekend property or their favorite, out of the way fishing spot.
Includes:
- 1 x Front OME Torsion Bars Pair (Gas & Diesel Applications Available)
- 2 x Front Nitro+ Shocks (Multiple Valving Options Available)
- 1 x Rear OME Coil Springs Pair (Multiple Lift Height & Coil Rate Options Available)
- 2 x Rear Nitro+ Shocks (Multiple Valving Options Available)
1 Kit Required Per Vehicle
Optional Accessories:
Caster/Camber Corrected Upper Control Arms:
Dobinsons Front Upper Control Arms Part# DOBUCAK006K
Light Racing Front Upper Control Arms Part# SUS25455
OME Front Upper Control Arms Part# OME UCA0010
SuperPro Front Upper Control Arms Part# SUSTRC6720
(Recommended to correct steering alignment)
OME Front Torsion Bar Reinforcement Brackets
Part# OME FK27
(Recommended for severe duty applications. These brackets reinforce the front torsion bar anchor bracket where it attaches to the front lower control arm. Heavy use can cause cracking at the stock control arm or bolt failure. Use of this bracket eliminates the failure.)
Slee Differential Drop Kit Part# SLEE SOK006
SuperPro Differential Drop Kit Part# SUSDD100470SP
Dobinsons Differential Drop Kit Part# SUS59532K
(Recommended When Lifting Front above 1.5". Relieves CV joint angle thus prolonging life of CV joints and boots. One kit required per vehicle. Includes all necessary hardware and instructions for installation.)
Dobinsons Adjustable Rear UPPER Control Arms Part# SUS59555K
Dobinsons Adjustable Rear LOWER Control Arms Part# SUS59551K
SPC Heavy Duty Rear Lower Control Arms Part# SUS25955
Suspension Notes:
When you have reached the point that you are ready to get a suspension kit ordered please call us at 801-563-1277, or use the contact us link to let us know you are ready to order and we will reach out to you. One of our experienced and trained sales staff will spend time discussing factors related to correct part number selection. These factors include, past, current, and future uses for the vehicle, current and planned accessories, loads, desired suspension height, and tire size. All this data will be recorded into a personalized "Build Sheet" on your vehicle and we will make recommendations based on this information.
Please use the Contact Us link or email info@cruiserteq.com for additional information.
If you are unsure on the proper fitment for your vehicle, please email info@cruiserteq.com with the full Model Code and Frame# / Vin#.
Trim Spacers may be required to trim vehicle to max. 1/4" or 15mm per coil. Spacers must be installed on the top end of coil.
*LX470 & 100 Series AHC equipped models will require a full or partial removal of the AHC system.
